Blog

Open, fast and free gamma radiation monitoring

By Regine Debatty (http://we-make-money-not-art.com)

The explosion of reactor number 4 at the Chernobyl nuclear power plant on 26 April 1986 was the most terrible nuclear accident the world had ever known. Soviet authorities, however, stayed silent on the disaster. Two days later and over 1,000 km away, an employee at the Forsmark nuclear plant in Sweden detected unusually high radiation, forcing the Soviet government to publicly acknowledge the tragedy.

Hopefully nothing remotely as catastrophic as the Chernobyl or the Fukushima disaster will ever happen again. However, if you live in the proximity of a nuclear power plant, you might want to have access to reliable data about any variation of radiation levels in your neighbourhood. The developers of GammaSense believe that citizens should have at home the tools and means to monitor radiation levels. Immediately, inexpensively and with a fair level of accuracy. 

The team found out that it is possible to use devices with a CCD or CMOS-based camera as gamma-detectors. Research by the Australian Nuclear Science and Technology Organisation has indeed demonstrated a correlation between the amount of gamma radiation and the number of white spots and streaks that appear in photos taken by phone which cameras have been covered with black tape.

The aim of the GammaSense project is to develop an open emergency-infrastructure that can be deployed within minutes, using only your laptop or smartphone and a piece of black tape.

When you cover your camera with a piece of aluminum foil, which is covered with black tape, you can start measuring. Cameras and webcams can thus capture the Gammas radiation and convert them into one unit per minute. This allows large increases to be captured and plotted on a map.

The experimental platform is still in development and being tested through a series of workshops with citizens, experts and policy officers who live in the vicinity of a nuclear plant.

GammaSense is the third Amsterdam-based pilot of Making Sense, a CAPS project with participating pilots in Barcelona, Pristina and Amsterdam. The pilot version of the radiation monitoring tool is available at www.gammasense.org.

Read the whole blog post here

Recente blogs

- woensdag 13 december 2017

Welke rol kan design spelen voor de zorg? En hoe? Deze vragen stonden centraal tijdens de Design for Health (D4H)-conferentie in Melbourne.

- maandag 11 december 2017

Op 14 december wordt er in de Amerika gestemd over een voorstel netneutraliteit grotendeels af te schaffen. We vroegen Taco van Dijk waarom we ons hier best zorgen over moeten maken.

- vrijdag 08 december 2017

Welke technologische toepassingen maken het voor burgers mogelijk om een actieve rol te hebben in het verzamelen van gegevens? Een bijdrage van Jacques Wallage.

- donderdag 23 november 2017

De nieuwe richtlijn PSD2 geeft banken mogelijkheid om jouw gegevens te delen met derden. Waarom zouden we ons hier zorgen over moeten maken?

- woensdag 22 november 2017

Fabschool gaf een serie lessen in de 021 Maakplaats in Reigersbos. Kinderen leerden er werken met 3D-printers, lasercutters en ontwerpprogramma's.